Chihiros LED Light Leg Bracket Kit for A Series Lights

The stainless steel legs for Chihiros RGB A+ & A Series(only A I) LEDs allows for placing the LED fixture on the aquarium in different heights and lengths. You can place the LED fixture higher above the tank giving room for emersed plants or allowing maintenance easier. The LED legs can also be used on tanks that aren't the exact size of the LED fixture to ensure it fits across your tank.

There are two ways of installing the stainless steel legs as one side is long & the other side is short.

1.) When the long section is placed vertically & the short one is placed horizontally, you can place the LED fixture up to 20cm(7.9in) above the aquarium. This allows 5cm(2in) on each side of the fixture to be adjusted enabling you to use the LED fixture on aquariums that are up to 10cm(4in) larger than the LED fixture.

2.) When the short section is placed vertically & the long section is placed horizontally, you can place the LED fixture up to 10cm(4in) above the aquarium. This allows for 15cm(5.9in) on each side of the fixture to be adjusted enabling you to use a LED fixture on aquariums that are up to 30cm(11.8in) larger than the LED fixture. With fixtures larger than 60cm(23.6in) only 10cm(4in) should be used because the weight of the fixture might bend the legs. 

• Multiple ways to adjust height & length
• Made from stainless steel
• Maximum glass thickness: 11mm(0.43in)